Tanks For Everything
[email protected]

Need assistance or advice with a product or lead time? Call our friendly Customer Services Team on 0117 244 4099 for expert help.....oh and don't forget we price match on most products!

WTE VORTEX 4 Person Sewage Treatment Plant

  • WTE VORTEX 4 Person Sewage Treatment Plant WTE VORTEX 4 Person Sewage Treatment Plant
    delivery 3 - 5 Working Days
    Need it quicker? Call 0117 244 4099

WTE VORTEX 4 Person Sewage Treatment Plant

  • £1,995.00 ex. VAT
  • £2,394.00 inc. VAT
  • Product Code: Vortex 4

Enquire about this product Add to wishlist Add to compare

Manufactured by WTE the VORTEX sewage treatment plant is a premium version of WTE's low-cost QUANTUM sewage treatment plant. The VORTEX is an Advanced Sludge Process (ASP) sewage treatment plant.

PLEASE NOTE 4PE SEWAGE TREATMENT PLANTS ARE NOT SUITABLE FOR DOMESTIC DWELLINGS. THE MINIMUM REQUIREMENT FOR A SINGLE HOUSE WITH UP TO 3 BEDROOMS IS A 5PE SYSTEM

 

Benefits include:

  • Extremely clean effluent - up to 98.9% pollutant reduction. 
  • Fully adjustable to suit the number of people using it.
  • The VORTEX sewage treatment plant range is 4, 6, & 8 person sizes.
  • The lowest electricity consumption of any electric sewage treatment plant - from only 30W per hour.
  • Much lower maintenance costs than Non-Electric Treatment systems.
  • Odourless - complete aerobic digestion throughout the sewage treatment plant.
  • One piece tank construction - not sectional - no leaking seals.
  • Very small size enables economic installation in tight spaces.
  • VORTEX has a unique debris screen - The Vibro-Screen™ keeps tampons, wipes, etc. out of the biodigester chamber of the plant, where they can cause damage, but lets organic solids through.
  • VORTEX recycles its own waste products resulting in less sludge to remove.
  • No Primary Settlement Tank - No Primary Tank Odour.
  • Simple and cheap maintenance - one piece construction ensures no structural weakness..
  • Top Quality linear motor compressor - these compressors are much more expensive than cheaper compressors used by other manufacturers, but they are almost silent, use very little electricity and CAN be repaired.
  • Cheap, easy installation.
  • 20 year tank warranty- no metalwork to corrode inside or outside the tank.
  • Can accept raw sewage pumped into it if required.
  • Versatile inlet depths - VORTEX sewage treatment plants can be supplied for different inlet invert levels - 550mm to 1,500mm.
  • EN 12566-3 2005 Test Report available on request. 
  • Unbeatable ammonia reduction - incredibly down to 0.3mg/L. Very important for sensitive watercourses.

 

Tank Specifications:

Model: VORTEX 4
Population Served: 4
Max. Hydraulic Load (litres /day): 600
Organic Load (g BOD5/day): 240
Ammonium-Nitrogen NH4-N(g) 32
Diameter (mm): 1215
Height to Ground Level (mm): 2000
Base to Inlet (mm): 1450
Base to Outlet (mm): 1400
Empty Plant Weight (kg): 107
Hourly Power (w): 30
Desludging Interval (months): 6 -36
Compliant with EN-12566 part 3: Yes
Standard Inlet Depth (mm): 550
Standard Outlet Depth (mm): 600
Tank Warranty (Years): 20
Blower Warranty (Years): 2

 

Options: 

Outlet: Choose from either the Standard Gravity option where the final effluent runs downhill to the water course (or drainage field) or the Integral Pumped Outlet if the effluent needs to be pumped uphill to a watercourse (or drainage field), the pump has a 12 month warranty. Please note: The pumped outlet will come with an External Blower as standard, if you wish to have the blower internal please contact our sales team.

Blower: The VORTEX is supplied as standard with a discreet internal blower. An external blower kiosk can be supplied if preferred as an option.

Invert: The standard invert depth of the VORTEX is 0.55m. If necessary this invert can be increased up to 1.00m by adding an additional 450mm riser kit.

 

Delivery:

Delivery of this product is FREE to most UK Mainland destinations but excludes  AB, BT, DD, HS, IV, KW, PA, KA, PH and Islands. For these locations please contact us or call 0117 244 4099 so we can provide an additional delivery quote. All deliveries are subject to suitable access for a high-sided large goods vehicle and you need your own mechanical offloading.

If you require any further assistance, please contact us with your requirements or call 0117 244 4099 so one of our sales team can help with your enquiry.

Reviews
Write a Review
Note: HTML is not translated!
    Bad           Good
Specification

How the VORTEX Sewage Treatment Plant Works:

Incoming sewage is screened to prevent accidental non-degradable products entering the digestion chamber. The Vibro-Screen™ allows organic sewage solids to enter the tank without problems.

The screened sewage is aerated and a microbial 'soup' develops that digests the pollutants and organic matter in the sewage. These beneficial microbes are constantly topped up with the microbes that settle out at the bottom of the final settlement tank, ensuring a constant supply of bacteria for the digestion process. There is no need to add extra bacteria at all, as is the case with some other plants.

The treated sewage then enters the final settlement chamber where activated sludge bacteria settle out at the bottom. These beneficial microbes are constantly returned to the aeration chamber, via the Vibro-Screen, to boost the treatment system performance.

The bacterial scum or crust that forms on the top of the effluent in the clarification chamber is returned through a pipe to the Vibro-Screen via the FSR  pipe.  This is an innovation unique to the VORTEX. Other activated sludge plants need this crust removing, by hand, at regular intervals.

It saves a lot of unpleasant work for both the owner and the service engineer, resulting in lower cost servicing bills.

Most sewage treatment plants struggle to work when they are under-loaded. A good rule of thumb is that if a system is working below 50% of its design capacity, there is not enough 'food' from the toilet solids to either grow, or maintain, a working bacterial population. VORTEX has solved this problem by having a simple hand-turned valve that can turn the amount of air required either up, or down, depending on the number of people using it. Such a SIMPLE solution to a complex problem.

VORTEX has advanced activated sludge sewage treatment plant features not found in any other treatment plant in the UK.

The ONLY electrical component is a small, external linear motor compressor which operates ALL the process stages. There are no pumps, motors or any moving parts within the plant. Click for How the VORTEX plant is so energy efficient

Delivery

All tank orders are booked in with you prior to delivery, we will always try to achieve the earliest possible date and there will be an opportunity to change the suggested delivery date if necessary. 

Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:

We aim to deliver most tanks within 3-10 working days from order and payment, however some special orders (including large sewage treatment plants,  underground tanks and steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates. 

Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).

For convenience, all single skin and bunded plastic oil tanks up to and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy offloading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.

Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incur an additional charge, please contact us for a quote before ordering if you require this option.

All orders will require a signature upon delivery.

FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0117 244 4099 for a delivery quote prior to ordering for these locations.

Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final destination will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.

Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.

Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0117 244 4099.

Sunday 28th April 2024
© Tanks For Everything Limited 2024
Responsive web design by Cotswold Web Services