Water storage tanks store a significant quantity of water supplies that can be utilised for various purposes, including but not limited to agricultural irrigation, commercial operations, and day-to-day home tasks. However, if inadequate maintenance is performed on these containers, they can be prone to damage. This is true regardless of the type of unit that is utilised or the application that is being carried out.
Common Water Tank Problems
Spend some time familiarising yourself with the typical problems that could arise with your water tank so that you can avoid the aggravation of having to deal with a tank that fails to function properly suddenly. These issues can arise with both overground water tanks and underground water tanks and can be easily fixed with the right attention.
Accumulated sediment in the water storage tank
This is one of the most widespread problems that can occur with a wide variety of rainwater tanks. It is necessary to regularly remove the layer of accumulated solids that typically builds at the tank's bottom and along its walls. Installing a filter at the tank's inlet can, in some circumstances, reduce the amount of sediment that builds up inside the tank.
However, for many who view this as a solution that is both costly and impractical, emptying and cleaning the stainless-steel tank once every few years can be sufficient to get the desired results.
Water tank tipping or settling
Take special precautions to ensure that any water runoff caused by rain or the tank overflow is correctly directed away from the area surrounding the tank's base. This ensures that the structure's base won't deteriorate over time. If you perform these tasks at the beginning of the installation process, you will save significant time and money and protect the tank and the pipes from damage caused by tilting.
Leaks and broken pipes
Leaks around tank fittings are very common, and so are bent or broken pipes connecting to the tank's fill or discharge ports. This occurred because the plumbing at the polyester water tank was not attached with an appropriately flexible connector when it should have been.
Even though the tank connections are practically strong, they are not meant to withstand consistent and severe stress. The most effective solution to this issue is to ensure that the installation is carried out in a manner that is balanced with quality to save some money. Check that your device's various connection points have flexible connectors attached to them.
Algae growth in water tanks
This occurs either because the material of the tank does not adequately block the sunlight or because the unit's lid has been lost or removed. The most effective method for avoiding the creation of algae is to restrict the amount of sunlight your supply is subjected to.
You must position your unit in an area that receives adequate shade. It is also suggested that an opaque plastic water storage tank be selected because the substance of such a tank does not permit light to enter the unit.
Regular Water Tank Maintenance To Avoid Problems
Cleaning your water tank regularly prevents bacteria, algae, and grime buildup. Keeping your tank clean and hygienic will preserve its resilience and lengthen its lifespan, even if you only use the water for outdoor purposes like watering your garden. Here are five tips for maintaining your water tank and avoiding problems.
1) Drain your tank
Connect a hose to the open valve and direct it to the garden to drain any remaining liquid (or elsewhere). Empty the tank until the hose stops leaking.
2) Clean your tank
To scrub the tank, use soap and hot water. Depending on your situation, you can use a pressure washer, a water hose, or a stiff brush. Thoroughly clean corners and joints. Let the mixture sit for 2 hours.
3) Wash & rinse your water tank.
If you don't have this equipment, fill the tank with hot water and let it stand.
4) Disinfect tank and pipes
Antibacterial spray or liquid bleach can disinfect the tank and pipes. They must be decontaminated and germ-free. To clean the pipes, fill the tank with water and let it run through all of the fixtures.
5) Safely empty the tank and dry it
The water used for disinfection contains a lot of chlorine. After waiting 30 minutes after filling the tank with clean water, the system should be flushed. Replace the top to prevent debris from falling into the clean tank. When the tank is dry, utilise it.
