Tanks For Everything
[email protected]

UPDATE: We are open for orders and advice. Most deliveries are still being made from stock. Some lead times are extended; contact us on 0117 244 4099 if you need an item quicker than the specified delivery time as we may be able to improve on this date. Thank you for your support!

Atkinson Tank Top - Top Offtake System

  • Atkinson Tank Top - Top Offtake System
    delivery 2-3 days
    Need it quicker? Call 0117 244 4099

Atkinson Tank Top - Top Offtake System

  • £71.00 ex. VAT
  • £85.20 inc. VAT
  • Product Code: TTV-01

Enquire about this product Add to wishlist Add to compare

Draw oil from your tank safely with the new Atkinson Tanktop, Top Offtake System.

Leading the way into the world of Top Offtake, the Atkinson Tanktop is the WORLDS FIRST AND ONLY Top Offtake device with all of the necessary features and functions to responsibly draw oil from the top of oil tanks. EC Reg. Des. No: 000472493-0001.

This innovative product has all the components required for drawing fuel oil from the top of the storage tank in one unit (no joints to leak oil out or air in). It incorporates all of the following into one neat, easy to install, unit:

  • Floating Suction Head
  • Floating Suction Tube (1.6M)
  • Non-Return Valve
  • 50 Micron Filter
  • Diaphragm Anti-siphon Valve
  • Anti-spill Valve
  • Tank Inlet Fitting 1" BSPM on steel tank version or screw fitting on plastic tank version.
  • Purging / Priming Button
  • Surface Gasket
  • Totally Waterproof

With Top Offtake it is imperative that joints are well made so with only one joint to make, the Atkinson Tanktop is the answer to an Engineer's dream.

This product draws on over 40 years of experience of manufacturing products for the oil heating market. The product incorporates an anti-siphon valve to prevent fuel siphoning from the tank in the event the oil line is broken thus avoiding environmental pollution (incurring heavy fines and clean-up costs).

Designed for the 21st century, where the demand is for a system that avoids breaching the bund on an oil storage tank and thus minimising the risk of environmental pollution, as supported by the Environment Agencies and OFTEC.

Now with 10mm push-fit hydraulic connector for simple fitting (blue connector is shown in photograph) inside the restrictive space of the bund - simply push the 10mm oil pipe into place. No screwing and making the joint air-tight required whatsoever.

To ensure your Tank Top works effectively you must have a deaerator fitted in your oil supply line.

Please follow the installation instructions carefully to ensure problem-free commissioning.

Two versions are available, choose from a steel tank model which has a 1" BSP Male thread or a plastic tank model which is screwed down on the top of the tank through three fixing points (fixings not supplied).

Write a Review
Note: HTML is not translated!
    Bad           Good

All tank orders are booked in with you prior to delivery, we will always try to achieve the earliest possible date and there will be an opportunity to change the suggested delivery date if necessary. 

Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:

We aim to deliver most tanks within 3-10 working days from order and payment, however some special orders (including large sewage treatment plants,  underground tanks and steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates. 

Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).

For convenience, all single skin and bunded plastic oil tanks up to and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy offloading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.

Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incur an additional charge, please contact us for a quote before ordering if you require this option.

All orders will require a signature upon delivery.

FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0117 244 4099 for a delivery quote prior to ordering for these locations.

Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final destination will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.

Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.

Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0117 244 4099.

Tuesday 5th July 2022
© Tanks For Everything Limited 2022
Responsive web design by Cotswold Web Services