Talk to our sales team: 01172 444 099 (Open 7.30am until late)
Free, Fast Delivery*on orders over £180 + VAT

3.0m Fire valve for oil heating

Specification:

Capillary Length (m): 3.0
Activation Temp Range (degrees C):  66 -72
Sensor Length (mm): 150
Sensor Diameter (mm): 12
Connections: 3/8" F / 10mm Compression

 

The Fuelstop TFV is suitable for use with Class C and D fuels (Heating Oil, Keroscene and Gas Oil or Diesel) as well as LPG and provides automatic shut off in the event of an overheat within a fuel burning appliance and fail safe shut off in the event of capillary or sensor failure.

 

There are 3 key parts of the Fuelstop TFV, the valve body (1) which is installed outside the external wall of the property. The capillary (2) runs from the valve to the valve body to the sensor (3) which is located in the casing of the appliance.

This Fuelstop TFV is manufactured to shut off in the temperature range of 66 to 72°C 

Fuelstop TFV's are OFTEC approved as they comply with OFTEC OFS E101 and have OFCERT Nos of 14102/1/2.

All Fuelstop valves are supplied with 3/8" F Threads and connectors including oilives and inserts for 10mm OD copper oil line pipe.


Installation:

  • Position the valve in accordance with BS5410 (Parts 1 and 2) and any other current legislation or guidelines.
  • Install the valve in an upright position. Unroll the capillary to prevent twisting and fix the phial inside the appliance casing at a point recommended by the appliance manufacturer. Where the burner is outside the casing, the phial should be fixed between 600 and 100mm directly above the burner.
  • Support the valve hexagon when tightening tube nuts. DO NOT HOLD THE VALVE HEAD, DO NOT OVERTIGHTEN THE VALVE CONNECTIONS.
  • Support the capillary along its length and sleeve through walls as necessary to prevent abrasion or damage and neatly coil any spare capillary to a minimum diameter of 80mm.
  • TRV Fire Valves are factory calibrated; there are NO serviceable parts, do not attempt to dismantle.
  • £29.95 (ex. VAT)
  • £35.94 (inc. VAT)
  • Product Code: FVC720310


Add to wishlist
Add to compare

Write a review

Note: HTML is not translated!
    Bad           Good

 

Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:

We aim to deliver all tanks within 3-10 working days from order and payment, however some special orders (including steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates.

Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).

For convenience all single skin and bunded plastic oil tanks upto and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy off loading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.

Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incurr an additional charge, please contact us for a quote before ordering if you require this option.

All orders will require a signature upon delivery.

FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0800 0568 350 or click on and complete the "Get A Free Quote" tab on the right hand side of the product page for a delivery quote prior to ordering for these locations.

Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final desitnation will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.

Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.

Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0800 0568 350 or 01172 444099.

Tuesday 15th October 2019
© Tanks For Everything Limited 2019
Responsive web design by Cotswold Web Services