Talk to our sales team: 0117 244 4099 (Open 7.30am until late)
Free, Fast Delivery*on orders over £180 + VAT

Turtle Silt Sentinel Filter Trap - Advanced Heavy Duty Silt Trap

The silt sentinel filter trap is designed to support SuDS management and the sewer infrastructure as part of a designed attenuation system, helping prevent flooding by limiting the amount that enters the attenuation system.
All silt sentinel units are manufactured from a high strength polyethylene twinwall, which makes them very strong and robust and able to be installed in granular surround or in some areas ‘as dug’ material. The chambers although very robust are relatively lightweight and as they are one piece units, they save significant amounts of onsite costs as they need no construction or wet trades.

Applications:

Designed specifically for siting upstream of modular/crate type attenuation systems the silt sentinel filter trap has two stages of filtration from the primary filter bucket and a secondary filter before the outlet.

 

How it works:

Surfacewater enters the unit and any silt and solids in the flow will drop into the filter bucket. This offers primary filtration, removing much of the heavier silt and sand. Any finer particles from the primary filtered flow through the filter bucket will settle at the base and then cleaner separated water will then pass through a secondary fine mesh filter before it is discharged via the outlet pipe. Both the filter bucket and secondary filter are simply removed for cleaning.

 

Specification:

Model: SSFT500
Diameter (mm): 500
Overall Height (mm): 980
Inlet Height (mm): 480
Outlet Height (mm): 700
Pipe Work Connections (mm): 110 or 160mm
Filter Basket  & Outlet Filter Included: Yes

 

Delivery:

FREE delivery of this product includes most UK locations, however postcodes TR, IV, KW, HS, PH, DD, PA, FK, KY as well as offshore locations will incur an additional delivery surcharge. Please contact us prior to ordering so we can quote the additional costs. This product is delivered to the kerbside and offloading is the customers responsibility. 

  • £812.00 (ex. VAT)
  • £974.40 (inc. VAT)
  • Product Code: SSFT500


Add to wishlist
Add to compare

Write a review

Note: HTML is not translated!
    Bad           Good

 

Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:

We aim to deliver all tanks within 3-10 working days from order and payment, however some special orders (including steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates.

Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).

For convenience, all single skin and bunded plastic oil tanks up to and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy offloading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.

Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incur an additional charge, please contact us for a quote before ordering if you require this option.

All orders will require a signature upon delivery.

FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0117 244 4099 for a delivery quote prior to ordering for these locations.

Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final destination will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.

Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.

Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0117 244 4099.

Tuesday 25th February 2020
© Tanks For Everything Limited 2020
Responsive web design by Cotswold Web Services