Tanks For Everything
[email protected]

Need assistance or advice with a product or lead time? Call our friendly Customer Services Team on 0117 244 4099 for expert help.....oh and don't forget we price match on most products!

Amazon Logo Free £50 Amazon Voucher with this product - limited time offer

Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant

  • Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant
    Delivery 5 - 7 Working Days
    Need it quicker? Call 0117 244 4099
  • Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant

Rewatec ASP06 HDPE - 6 Person Sewage Treatment Plant

  • £1,775.00 ex. VAT
  • was £2,254.80
  • £2,130.00 inc. VAT
  • Product Code: ASP06 HDPE

Enquire about this product Add to wishlist Add to compare

The Rewatec ASP Sewage Treatment Plant is manufactured in High Density Polyethylene (HDPE) and is ideal for domestic and commercial installations where mains drainage is not available. The ASP range is available to suit populations from 6 persons up to 25 persons. The ASP range is easy to install and benefits from low installation costs.

 

Choosing the right sewage treatment plant is important, as in the case of a property alteration or extension, Building Control will strongly advise for a plant that is suitable for handling the increased flows and loads of the new development.

 

Key Benefits:

  • Minimal visual impact with quiet and odourless operation.
  • Can be installed in pea shingle or self-compacting backfill (subject to ground conditions).
  • Low maintenance costs with better than average emptying frequency.
  • Designed and tested in accordance with BS EN12566-3:2005 and CE Marked
  • Achieves effluent quality better than 20mg/L BOD; 30mg/L SS and 20 mg/L NH3
  • Option of a pumped outlet
  • 12 months parts warranty (or 5 years if the plant is registered upon installation)

 

Specification:

Model Number:  ASP 06
Max. Number of Full Time Residents: 6
Daily Flow (litres/day): 1200
BOD Load (g/day): 360
Ammonia (g NH3/day): 48
Weight when Empty (kg): 250
Outside Diameter (mm): 2000
Depth including lid (mm): 2250
Standard Inlet Invert (mm): 700
Inlet Invert to Base Gravity (mm): 1500
Outlet Invert Gravity Systems (mm):* 800
Motor Rating (watts): 80
Drainage Connections (mm): 110

 

* Values shown are for HDPE Gravity System. Pumped Systems may vary.

 

Options:

 

ASP Gravity or Pumped Outlet:

Options include a gravity outlet with either an integral blower or for a small additional charge an external blower.  Pumped outlets are also available where the wastewater needs to be pumped uphill away from the unit to either a watercourse or drainage field. The pumped outlet option is only available with an integral blower.

 

Invert Depths:

The standard invert depth is 700mm. Options on inverts are 1050mm for either gravity or pumped systems using a telescopic extension. The gravity system is also available with a 1500mm invert by selecting the fixed shaft option.

 

Low-Pressure Alarm:

The low-pressure alarm warns the user of the plant if there is low pressure in the air supply system. The warning is by buzzer and bright LED.

 

Delivery:

FREE delivery of this product includes the UK Mainland but excludes postcodes in PA, IV, KW, and offshore locations and is also subject to suitable access for a large goods vehicle. This product is delivered to the kerbside. It is the customers responsibility to provide suitable mechanical offloading facilities (eg. JCB excavator or loader) to offload this tank. If you need any assistance please contact us on 0800 0568 350 prior to purchase - please remember we are here to help! 

Reviews
Write a Review
Note: HTML is not translated!
    Bad           Good
Delivery

All tank orders are booked in with you prior to delivery, we will always try to achieve the earliest possible date and there will be an opportunity to change the suggested delivery date if necessary. 

Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:

We aim to deliver most tanks within 3-10 working days from order and payment, however some special orders (including large sewage treatment plants,  underground tanks and steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates. 

Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).

For convenience, all single skin and bunded plastic oil tanks up to and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy offloading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.

Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incur an additional charge, please contact us for a quote before ordering if you require this option.

All orders will require a signature upon delivery.

FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0117 244 4099 for a delivery quote prior to ordering for these locations.

Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final destination will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.

Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.

Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0117 244 4099.

Tags: Conder ASP06,

Thursday 28th March 2024
© Tanks For Everything Limited 2024
Responsive web design by Cotswold Web Services