Tanks For Everything
[email protected]

Need assistance or advice with a product or lead time? Call our friendly Customer Services Team on 0117 244 4099 for expert help.....oh and don't forget we price match on most products!

Turtle GT1 Grease Trap 300 Litre

  • Turtle GT1 Grease Trap 300 Litre
    Delivery 3-5 Days
    Need it quicker? Call 0117 244 4099
  • Turtle GT1 Grease Trap 300 Litre
  • Turtle GT1 Grease Trap 300 Litre

Turtle GT1 Grease Trap 300 Litre

  • £499.00 ex. VAT
  • £598.80 inc. VAT
  • Product Code: GT1

Enquire about this product Add to wishlist Add to compare

Commercial kitchens and food processing establishments generate Fats, Oils and Greases which are known as FOGs from their specific daily operations of food preparation. If the FOG’s are not treated or removed before entering the main drainage network then it can result in blockages or have a pollution impact on the local environment. Both of these instances could affect the operation of the business. Building Regulations in the UK have made it mandatory to install a suitable trap, separator or treatment system in commercial premises preparing hot food with wash down sinks to help the removal of FOGs from wastewater.

 

Installation:

  • For best results the GT should be installed at least 3 metres from the sink or source of wastewater, allowing the wastewater to cool before it enters the unit
  • The GT should also be connected to the vent stack
  • The unit should be encased in a minimum 150mm concrete surround with a concrete base of 150mm. Allow the base concrete to set and then fill the unit with clean water to the outlet before the concrete surround is poured
  • Always fill with clean cold water before use and after maintenance
  • The GT should be positioned in a non-traffic area
  • If installed inside a building then a sealed cover will need to be used
  • Regular maintenance by a qualified contractor will ensure reliable operation

 

Features:

  • Highly Effective Grease Management
  • Superior Grease Trapping and Retention
  • Full access to inlet and outlet
  • Environmental and Building Regulations Compliant
  • Quality UK Manufacture
  • Supplied with lockable Pedestrian Duty A15 lid as standard!

 

Specification:

Model No: GT1
Total Volume (litres): 300
Working Capacity (litres): 225
Sludge Storage (litres): 75
Max No. Meals (per Day): 165
Diameter (mm): 720
Width (mm): 720
Height (mm): 1116
Pipework Size (mm): 110
Inlet Invert (mm): 300
Outlet Invert (mm): 315
Designed To Meet Standard: EN1825-1

 

Delivery:

FREE delivery of this product includes most UK locations, however postcodes TR, IV, KW, HS, PH, DD, PA, FK, KY as well as offshore locations will incur an additional delivery surcharge. Please contact us prior to ordering so we can quote the additional costs. This product is delivered to the kerbside and offloading is the customers' responsibility. 

 

Reviews
Write a Review
Note: HTML is not translated!
    Bad           Good
Delivery

All tank orders are booked in with you prior to delivery, we will always try to achieve the earliest possible date and there will be an opportunity to change the suggested delivery date if necessary. 

Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:

We aim to deliver most tanks within 3-10 working days from order and payment, however some special orders (including large sewage treatment plants,  underground tanks and steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates. 

Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).

For convenience, all single skin and bunded plastic oil tanks up to and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy offloading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.

Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incur an additional charge, please contact us for a quote before ordering if you require this option.

All orders will require a signature upon delivery.

FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0117 244 4099 for a delivery quote prior to ordering for these locations.

Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final destination will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.

Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.

Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0117 244 4099.

Thursday 28th March 2024
© Tanks For Everything Limited 2024
Responsive web design by Cotswold Web Services