UPDATE: We are open for orders and advice. Most deliveries are still being made from stock. Some lead times are extended; contact us on 0117 244 4099 if you need an item quicker than the specified delivery time as we may be able to improve on this date. Thank you for your support!
Atlantis SIP.R1200 1200 Litre Single Skin Oil Storage Tank
Atlantis SIP.R1200 1200 Litre Single Skin Oil Storage Tank
- £566.00 ex. VAT
- £679.20 inc. VAT
- Product Code: SIP.R1200
This single skin oil tank is suitable for the storage of Kerosene, Diesel and Water, as well as certain other oils. Manufactured from tough polyethylene, this slimline oil tank complies with OFTEC requirements and Oil Pollution Prevention Guidelines (England and Wales) 2002 PPG2 and comes with a 5-year warranty.
|Capacity:||1200 Litres / 265 Gallons|
|Length in mm:||1800|
|Width in mm:||710|
|Height in mm:||1300|
|Weight in kg when empty:||65|
|Outlet:||1" BSP Female|
|Fill Point:||2" BSP with cap & chain|
|Inspection Access:||Yes 4"|
|Manufacturer Warranty||5 Years|
Apollo - This option provides an Apollo electronic remote tank contents gauge.
Clock Face Gauge - A clock face gauge is a mechanical float gauge, the gauge is fitted on the top of the tank and gives a reading of Empty, 1/4, 1/2, 3/4 or Full.
Sight Gauge - This option includes a push-button sight gauge, with 1" BSP connection for filter kit.
The SIP range of single skin oil tanks can be supplied with an outlet filter kit to suit your application, please see the datasheet in the Product Data section for reference.
Single skin oil tanks can be installed at a domestic property where a tank with secondary containment (or bunded tank) is not required.
Generally a single skin tank cannot legally be installed if the tank is:
- in excess of 2500 litres
- within 10m of controlled water (river, stream, ditch, soakaway, septic tank etc.)
- located where a spillage could enter a loose fitting manhole or open drain
- within 50m of a well, borehole or spring
- located over a hard surface where a spillage could enter controlled water
- in a position where the vent pipe outlet is not visable from the fill point
- within an Enviroment Agency source protection zone 1 (see www.environment-agency.gov.uk)
- or in close proximity to any other environmental hazard
- All commercial properties must have tanks with secondary containment if they store over 200 litres of oil (single skin tanks can be used as long as they are inside a masonry bund which is impervious to oil and contains 110% of the primary tanks capacity).
If you are unsure as to whether you can legally install a single skin tank, please contact us before purchase on 0800 0568 350 so we can discuss the Oil Storage Regulations with you.
Or alternatively, please visit www.oftec.org for more information.
Tanks For Everything strongly recommends the use of a bunded oil tank as the safest and most secure method of storing oil. If in doubt please contact us or click here to view our range of plastic bunded heating oil tanks.
All oil tanks should be installed by a competent person in accordance with the OFTEC regulations, British Standards and LABC regulations.
All tank orders are booked in with you prior to delivery, we will always try to achieve the earliest possible date and there will be an opportunity to change the suggested delivery date if necessary.
Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:
We aim to deliver most tanks within 3-10 working days from order and payment, however some special orders (including large sewage treatment plants, underground tanks and steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates.
Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).
For convenience, all single skin and bunded plastic oil tanks up to and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy offloading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.
Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incur an additional charge, please contact us for a quote before ordering if you require this option.
All orders will require a signature upon delivery.
FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0117 244 4099 for a delivery quote prior to ordering for these locations.
Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final destination will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.
Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.
Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0117 244 4099.