Talk to our sales team: 0117 244 4099 (Open 7.30am until late)
Free, Fast Delivery*on orders over £180 + VAT

Covid-19 Update: We are open for orders and advice. Deliveries are still being made from stock. Keep Safe.

GT1 Grease Trap 100 Litre

Commercial kitchens and food processing establishments generate a significant amount of FOG’s from their specific daily operations. If the FOG’s are not treated before entering the main drainage network then it will from our experience lead to major issues with your drainage and have an adverse impact on the local environment and business operation. Building Regulations in the UK have made it mandatory to install a suitable trap, separator or treatment system in commercial premises preparing hot food with wash down sinks to help the removal of FOGs from wastewater.

Since its launch in 2005, many thousands of gt underground grease traps have been installed throughout the UK and the gt’s single stage design has proven to work well in the basic separation of FOG’s and offers a simple cost effective solution to FOG’s/Grease Management.

The new gt design features a new cylindrical body moving away from the previous rectangular shape and with an anti flotation collar these design changes greatly improve the strength and the efficiency of the installation.

 

 

Installation:

  • For best results the gt should be at least 3 metres from the sink or source of wastewater, allowing the influent to cool before it enters the unit.
  • The unit should be incased in a minimum 100mm concrete surround with a concrete base of 150mm. Allow the base concrete to set and then fill the unit with clean water to outlet before concrete surround is poured
  • We recommend no more than 600mm to pipework
  • Always fill with clean cold water before use and after maintenance

 

Features:

  • Highly Effective Grease Management
  • Superior Grease Trapping and Retention
  • Full access to inlet and outlet
  • Environmental and Building Regulations Compliant
  • Quality UK Manufacture
  • Supplied with Pedestrian duty lid as standard!

 

Specification:

Model No: GT1
Volume (litres): 100
Diameter (mm): 640
Width (mm): 650
Height (mm): 658
Standard Pipe Size (mm): 110
Inlet Height (mm): 240
Outlet Height (mm): 260

 

Delivery:

FREE delivery of this product includes most UK locations, however postcodes TR, IV, KW, HS, PH, DD, PA, FK, KY as well as offshore locations will incur an additional delivery surcharge. Please contact us prior to ordering so we can quote the additional costs. This product is delivered to the kerbside and offloading is the customers responsibility. 

 

  • £230.00 (ex. VAT)
  • £276.00 (inc. VAT)
  • Product Code: GT1


Add to wishlist
Add to compare

Write a review

Note: HTML is not translated!
    Bad           Good

 

Please take a few moments to read the information below as we would like to ensure your delivery takes place as smoothly as possible:

We aim to deliver all tanks within 3-10 working days from order and payment, however some special orders (including steel products) may take longer. If your order is time critical please contact us before ordering so we can confirm delivery dates.

Parts are dispatched within 24 hrs subject to stock availability and please allow 2-3 days for delivery (depending upon location).

For convenience, all single skin and bunded plastic oil tanks up to and including 2500 litres in capacity are delivered on a vehicle with a tail lift to allow easy offloading at the kerbside. Please look for our "Free Tail Lift Offload" icon to confirm which products are included. Unless otherwise agreed by Tanks For Everything (TFE) offloading of all other products are the customer's responsibility.

Delivery will be between 07.30 and 18.30 on the expected delivery day. AM/PM Deliveries are available for some products, however these often incur an additional charge, please contact us for a quote before ordering if you require this option.

All orders will require a signature upon delivery.

FREE delivery includes all of England and Wales mainland destinations, however certain manufacturers charge extra for deliveries to Scotland and the Highlands. Please contact us on 0117 244 4099 for a delivery quote prior to ordering for these locations.

Deliveries of larger products (typically over 2500 litres) require delivery by an articulated vehicle. Please ensure the roads and access point to your delivery address are suitable for a 45ft long high sided articulated vehicle. If access is an issue please arrange delivery to a suitable alternative address where access will not be an issue. The ongoing delivery to the final destination will be your responsibility. If a delivery needs to be aborted, TFE reserves the right to pass on any additional delivery costs, so please if in doubt discuss this with us at time of order.

Whilst every effort will be made to deliver on the expected delivery date, TFE will not accept any charges for labour or compensation claims arising from failed deliveries. TFE strongly recommends that tanks and equipment are ordered in advance of installation allowing sufficient time for any issues to be addressed.

Please remember we are here to help and if we can be of any further assistance at any stage please do not hesitate to contact us on 0117 244 4099.

Wednesday 25th November 2020
© Tanks For Everything Limited 2020
Responsive web design by Cotswold Web Services